pub struct Headers<'a>(/* private fields */);Implementations§
source§impl<'a> Headers<'a>
impl<'a> Headers<'a>
sourcepub fn last_modified(&self) -> Result<OffsetDateTime>
pub fn last_modified(&self) -> Result<OffsetDateTime>
Returns the date and time the blob was last modified. Any operation that modifies the blob, including an update of the blob’s metadata or properties, changes the last-modified time of the blob.
sourcepub fn x_ms_creation_time(&self) -> Result<OffsetDateTime>
pub fn x_ms_creation_time(&self) -> Result<OffsetDateTime>
Returns the date and time the blob was created.
pub fn x_ms_meta(&self) -> Result<&str>
sourcepub fn x_ms_or_policy_id(&self) -> Result<&str>
pub fn x_ms_or_policy_id(&self) -> Result<&str>
Optional. Only valid when Object Replication is enabled for the storage container and on the destination blob of the replication.
sourcepub fn x_ms_or(&self) -> Result<&str>
pub fn x_ms_or(&self) -> Result<&str>
Optional. Only valid when Object Replication is enabled for the storage container and on the source blob of the replication. When retrieving this header, it will return the header with the policy id and rule id (e.g. x-ms-or-policyid_ruleid), and the value will be the status of the replication (e.g. complete, failed).
sourcepub fn x_ms_blob_type(&self) -> Result<&str>
pub fn x_ms_blob_type(&self) -> Result<&str>
The blob’s type.
sourcepub fn x_ms_copy_completion_time(&self) -> Result<OffsetDateTime>
pub fn x_ms_copy_completion_time(&self) -> Result<OffsetDateTime>
Conclusion time of the last attempted Copy Blob operation where this blob was the destination blob. This value can specify the time of a completed, aborted, or failed copy attempt. This header does not appear if a copy is pending, if this blob has never been the destination in a Copy Blob operation, or if this blob has been modified after a concluded Copy Blob operation using Set Blob Properties, Put Blob, or Put Block List.
sourcepub fn x_ms_copy_status_description(&self) -> Result<&str>
pub fn x_ms_copy_status_description(&self) -> Result<&str>
Only appears when x-ms-copy-status is failed or pending. Describes the cause of the last fatal or non-fatal copy operation failure. This header does not appear if this blob has never been the destination in a Copy Blob operation, or if this blob has been modified after a concluded Copy Blob operation using Set Blob Properties, Put Blob, or Put Block List
sourcepub fn x_ms_copy_id(&self) -> Result<&str>
pub fn x_ms_copy_id(&self) -> Result<&str>
String identifier for this copy operation. Use with Get Blob Properties to check the status of this copy operation, or pass to Abort Copy Blob to abort a pending copy.
sourcepub fn x_ms_copy_progress(&self) -> Result<&str>
pub fn x_ms_copy_progress(&self) -> Result<&str>
Contains the number of bytes copied and the total bytes in the source in the last attempted Copy Blob operation where this blob was the destination blob. Can show between 0 and Content-Length bytes copied. This header does not appear if this blob has never been the destination in a Copy Blob operation, or if this blob has been modified after a concluded Copy Blob operation using Set Blob Properties, Put Blob, or Put Block List
sourcepub fn x_ms_copy_source(&self) -> Result<&str>
pub fn x_ms_copy_source(&self) -> Result<&str>
URL up to 2 KB in length that specifies the source blob or file used in the last attempted Copy Blob operation where this blob was the destination blob. This header does not appear if this blob has never been the destination in a Copy Blob operation, or if this blob has been modified after a concluded Copy Blob operation using Set Blob Properties, Put Blob, or Put Block List.
sourcepub fn x_ms_copy_status(&self) -> Result<&str>
pub fn x_ms_copy_status(&self) -> Result<&str>
State of the copy operation identified by x-ms-copy-id.
sourcepub fn x_ms_incremental_copy(&self) -> Result<bool>
pub fn x_ms_incremental_copy(&self) -> Result<bool>
Included if the blob is incremental copy blob.
sourcepub fn x_ms_copy_destination_snapshot(&self) -> Result<&str>
pub fn x_ms_copy_destination_snapshot(&self) -> Result<&str>
Included if the blob is incremental copy blob or incremental copy snapshot, if x-ms-copy-status is success. Snapshot time of the last successful incremental copy snapshot for this blob.
sourcepub fn x_ms_lease_duration(&self) -> Result<&str>
pub fn x_ms_lease_duration(&self) -> Result<&str>
When a blob is leased, specifies whether the lease is of infinite or fixed duration.
sourcepub fn x_ms_lease_state(&self) -> Result<&str>
pub fn x_ms_lease_state(&self) -> Result<&str>
Lease state of the blob.
sourcepub fn x_ms_lease_status(&self) -> Result<&str>
pub fn x_ms_lease_status(&self) -> Result<&str>
The current lease status of the blob.
sourcepub fn content_length(&self) -> Result<i64>
pub fn content_length(&self) -> Result<i64>
The number of bytes present in the response body.
sourcepub fn content_type(&self) -> Result<&str>
pub fn content_type(&self) -> Result<&str>
The content type specified for the blob. The default content type is ‘application/octet-stream’
sourcepub fn e_tag(&self) -> Result<&str>
pub fn e_tag(&self) -> Result<&str>
The ETag contains a value that you can use to perform operations conditionally. If the request version is 2011-08-18 or newer, the ETag value will be in quotes.
sourcepub fn content_md5(&self) -> Result<&str>
pub fn content_md5(&self) -> Result<&str>
If the blob has an MD5 hash and this operation is to read the full blob, this response header is returned so that the client can check for message content integrity.
sourcepub fn content_encoding(&self) -> Result<&str>
pub fn content_encoding(&self) -> Result<&str>
This header returns the value that was specified for the Content-Encoding request header
sourcepub fn content_disposition(&self) -> Result<&str>
pub fn content_disposition(&self) -> Result<&str>
This header returns the value that was specified for the ‘x-ms-blob-content-disposition’ header. The Content-Disposition response header field conveys additional information about how to process the response payload, and also can be used to attach additional metadata. For example, if set to attachment, it indicates that the user-agent should not display the response, but instead show a Save As dialog with a filename other than the blob name specified.
sourcepub fn content_language(&self) -> Result<&str>
pub fn content_language(&self) -> Result<&str>
This header returns the value that was specified for the Content-Language request header.
sourcepub fn cache_control(&self) -> Result<&str>
pub fn cache_control(&self) -> Result<&str>
This header is returned if it was previously specified for the blob.
sourcepub fn x_ms_blob_sequence_number(&self) -> Result<i64>
pub fn x_ms_blob_sequence_number(&self) -> Result<i64>
The current sequence number for a page blob. This header is not returned for block blobs or append blobs
sourcepub fn x_ms_client_request_id(&self) -> Result<&str>
pub fn x_ms_client_request_id(&self) -> Result<&str>
If a client request id header is sent in the request, this header will be present in the response with the same value.
sourcepub fn x_ms_request_id(&self) -> Result<&str>
pub fn x_ms_request_id(&self) -> Result<&str>
This header uniquely identifies the request that was made and can be used for troubleshooting the request.
sourcepub fn x_ms_version(&self) -> Result<&str>
pub fn x_ms_version(&self) -> Result<&str>
Indicates the version of the Blob service used to execute the request. This header is returned for requests made against version 2009-09-19 and above.
sourcepub fn date(&self) -> Result<OffsetDateTime>
pub fn date(&self) -> Result<OffsetDateTime>
UTC date/time value generated by the service that indicates the time at which the response was initiated
sourcepub fn accept_ranges(&self) -> Result<&str>
pub fn accept_ranges(&self) -> Result<&str>
Indicates that the service supports requests for partial blob content.
sourcepub fn x_ms_blob_committed_block_count(&self) -> Result<i32>
pub fn x_ms_blob_committed_block_count(&self) -> Result<i32>
The number of committed blocks present in the blob. This header is returned only for append blobs.
sourcepub fn x_ms_server_encrypted(&self) -> Result<bool>
pub fn x_ms_server_encrypted(&self) -> Result<bool>
The value of this header is set to true if the blob data and application metadata are completely encrypted using the specified algorithm. Otherwise, the value is set to false (when the blob is unencrypted, or if only parts of the blob/application metadata are encrypted).
sourcepub fn x_ms_encryption_key_sha256(&self) -> Result<&str>
pub fn x_ms_encryption_key_sha256(&self) -> Result<&str>
The SHA-256 hash of the encryption key used to encrypt the metadata. This header is only returned when the metadata was encrypted with a customer-provided key.
sourcepub fn x_ms_encryption_scope(&self) -> Result<&str>
pub fn x_ms_encryption_scope(&self) -> Result<&str>
Returns the name of the encryption scope used to encrypt the blob contents and application metadata. Note that the absence of this header implies use of the default account encryption scope.
sourcepub fn x_ms_access_tier(&self) -> Result<&str>
pub fn x_ms_access_tier(&self) -> Result<&str>
The tier of page blob on a premium storage account or tier of block blob on blob storage LRS accounts. For a list of allowed premium page blob tiers, see https://docs.microsoft.com/en-us/azure/virtual-machines/windows/premium-storage#features. For blob storage LRS accounts, valid values are Hot/Cool/Archive.
sourcepub fn x_ms_access_tier_inferred(&self) -> Result<bool>
pub fn x_ms_access_tier_inferred(&self) -> Result<bool>
For page blobs on a premium storage account only. If the access tier is not explicitly set on the blob, the tier is inferred based on its content length and this header will be returned with true value.
sourcepub fn x_ms_archive_status(&self) -> Result<&str>
pub fn x_ms_archive_status(&self) -> Result<&str>
For blob storage LRS accounts, valid values are rehydrate-pending-to-hot/rehydrate-pending-to-cool. If the blob is being rehydrated and is not complete then this header is returned indicating that rehydrate is pending and also tells the destination tier.
sourcepub fn x_ms_access_tier_change_time(&self) -> Result<OffsetDateTime>
pub fn x_ms_access_tier_change_time(&self) -> Result<OffsetDateTime>
The time the tier was changed on the object. This is only returned if the tier on the block blob was ever set.
sourcepub fn x_ms_version_id(&self) -> Result<&str>
pub fn x_ms_version_id(&self) -> Result<&str>
A DateTime value returned by the service that uniquely identifies the blob. The value of this header indicates the blob version, and may be used in subsequent requests to access this version of the blob.
sourcepub fn x_ms_is_current_version(&self) -> Result<bool>
pub fn x_ms_is_current_version(&self) -> Result<bool>
The value of this header indicates whether version of this blob is a current version, see also x-ms-version-id header.
sourcepub fn x_ms_tag_count(&self) -> Result<i64>
pub fn x_ms_tag_count(&self) -> Result<i64>
The number of tags associated with the blob
sourcepub fn x_ms_expiry_time(&self) -> Result<OffsetDateTime>
pub fn x_ms_expiry_time(&self) -> Result<OffsetDateTime>
The time this blob will expire.
sourcepub fn x_ms_blob_sealed(&self) -> Result<bool>
pub fn x_ms_blob_sealed(&self) -> Result<bool>
If this blob has been sealed
sourcepub fn x_ms_rehydrate_priority(&self) -> Result<&str>
pub fn x_ms_rehydrate_priority(&self) -> Result<&str>
If an object is in rehydrate pending state then this header is returned with priority of rehydrate. Valid values are High and Standard.
sourcepub fn x_ms_last_access_time(&self) -> Result<OffsetDateTime>
pub fn x_ms_last_access_time(&self) -> Result<OffsetDateTime>
UTC date/time value generated by the service that indicates the time at which the blob was last read or written to
sourcepub fn x_ms_immutability_policy_until_date(&self) -> Result<OffsetDateTime>
pub fn x_ms_immutability_policy_until_date(&self) -> Result<OffsetDateTime>
UTC date/time value generated by the service that indicates the time at which the blob immutability policy will expire.
sourcepub fn x_ms_immutability_policy_mode(&self) -> Result<&str>
pub fn x_ms_immutability_policy_mode(&self) -> Result<&str>
Indicates immutability policy mode.
sourcepub fn x_ms_legal_hold(&self) -> Result<bool>
pub fn x_ms_legal_hold(&self) -> Result<bool>
Indicates if a legal hold is present on the blob.