Enum linux_raw_sys::net::_bindgen_ty_3

source ·
#[non_exhaustive]
#[repr(u32)]
pub enum _bindgen_ty_3 {
Show 59 variants DEVCONF_FORWARDING = 0, DEVCONF_HOPLIMIT = 1, DEVCONF_MTU6 = 2, DEVCONF_ACCEPT_RA = 3, DEVCONF_ACCEPT_REDIRECTS = 4, DEVCONF_AUTOCONF = 5, DEVCONF_DAD_TRANSMITS = 6, DEVCONF_RTR_SOLICITS = 7, DEVCONF_RTR_SOLICIT_INTERVAL = 8, DEVCONF_RTR_SOLICIT_DELAY = 9, DEVCONF_USE_TEMPADDR = 10, DEVCONF_TEMP_VALID_LFT = 11, DEVCONF_TEMP_PREFERED_LFT = 12, DEVCONF_REGEN_MAX_RETRY = 13, DEVCONF_MAX_DESYNC_FACTOR = 14, DEVCONF_MAX_ADDRESSES = 15, DEVCONF_FORCE_MLD_VERSION = 16, DEVCONF_ACCEPT_RA_DEFRTR = 17, DEVCONF_ACCEPT_RA_PINFO = 18, DEVCONF_ACCEPT_RA_RTR_PREF = 19, DEVCONF_RTR_PROBE_INTERVAL = 20, DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN = 21, DEVCONF_PROXY_NDP = 22, DEVCONF_OPTIMISTIC_DAD = 23, DEVCONF_ACCEPT_SOURCE_ROUTE = 24, DEVCONF_MC_FORWARDING = 25, DEVCONF_DISABLE_IPV6 = 26, DEVCONF_ACCEPT_DAD = 27, DEVCONF_FORCE_TLLAO = 28, DEVCONF_NDISC_NOTIFY = 29, DEVCONF_MLDV1_UNSOLICITED_REPORT_INTERVAL = 30, DEVCONF_MLDV2_UNSOLICITED_REPORT_INTERVAL = 31, DEVCONF_SUPPRESS_FRAG_NDISC = 32, DEVCONF_ACCEPT_RA_FROM_LOCAL = 33, DEVCONF_USE_OPTIMISTIC = 34, DEVCONF_ACCEPT_RA_MTU = 35, DEVCONF_STABLE_SECRET = 36, DEVCONF_USE_OIF_ADDRS_ONLY = 37, DEVCONF_ACCEPT_RA_MIN_HOP_LIMIT = 38, DEVCONF_IGNORE_ROUTES_WITH_LINKDOWN = 39, DEVCONF_DROP_UNICAST_IN_L2_MULTICAST = 40, DEVCONF_DROP_UNSOLICITED_NA = 41, DEVCONF_KEEP_ADDR_ON_DOWN = 42, DEVCONF_RTR_SOLICIT_MAX_INTERVAL = 43, DEVCONF_SEG6_ENABLED = 44, DEVCONF_SEG6_REQUIRE_HMAC = 45, DEVCONF_ENHANCED_DAD = 46, DEVCONF_ADDR_GEN_MODE = 47, DEVCONF_DISABLE_POLICY = 48, DEVCONF_ACCEPT_RA_RT_INFO_MIN_PLEN = 49, DEVCONF_NDISC_TCLASS = 50, DEVCONF_RPL_SEG_ENABLED = 51, DEVCONF_RA_DEFRTR_METRIC = 52, DEVCONF_IOAM6_ENABLED = 53, DEVCONF_IOAM6_ID = 54, DEVCONF_IOAM6_ID_WIDE = 55, DEVCONF_NDISC_EVICT_NOCARRIER = 56, DEVCONF_ACCEPT_UNTRACKED_NA = 57, DEVCONF_MAX = 58,
}

Variants (Non-exhaustive)§

This enum is marked as non-exhaustive
Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.
§

DEVCONF_FORWARDING = 0

§

DEVCONF_HOPLIMIT = 1

§

DEVCONF_MTU6 = 2

§

DEVCONF_ACCEPT_RA = 3

§

DEVCONF_ACCEPT_REDIRECTS = 4

§

DEVCONF_AUTOCONF = 5

§

DEVCONF_DAD_TRANSMITS = 6

§

DEVCONF_RTR_SOLICITS = 7

§

DEVCONF_RTR_SOLICIT_INTERVAL = 8

§

DEVCONF_RTR_SOLICIT_DELAY = 9

§

DEVCONF_USE_TEMPADDR = 10

§

DEVCONF_TEMP_VALID_LFT = 11

§

DEVCONF_TEMP_PREFERED_LFT = 12

§

DEVCONF_REGEN_MAX_RETRY = 13

§

DEVCONF_MAX_DESYNC_FACTOR = 14

§

DEVCONF_MAX_ADDRESSES = 15

§

DEVCONF_FORCE_MLD_VERSION = 16

§

DEVCONF_ACCEPT_RA_DEFRTR = 17

§

DEVCONF_ACCEPT_RA_PINFO = 18

§

DEVCONF_ACCEPT_RA_RTR_PREF = 19

§

DEVCONF_RTR_PROBE_INTERVAL = 20

§

DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN = 21

§

DEVCONF_PROXY_NDP = 22

§

DEVCONF_OPTIMISTIC_DAD = 23

§

DEVCONF_ACCEPT_SOURCE_ROUTE = 24

§

DEVCONF_MC_FORWARDING = 25

§

DEVCONF_DISABLE_IPV6 = 26

§

DEVCONF_ACCEPT_DAD = 27

§

DEVCONF_FORCE_TLLAO = 28

§

DEVCONF_NDISC_NOTIFY = 29

§

DEVCONF_MLDV1_UNSOLICITED_REPORT_INTERVAL = 30

§

DEVCONF_MLDV2_UNSOLICITED_REPORT_INTERVAL = 31

§

DEVCONF_SUPPRESS_FRAG_NDISC = 32

§

DEVCONF_ACCEPT_RA_FROM_LOCAL = 33

§

DEVCONF_USE_OPTIMISTIC = 34

§

DEVCONF_ACCEPT_RA_MTU = 35

§

DEVCONF_STABLE_SECRET = 36

§

DEVCONF_USE_OIF_ADDRS_ONLY = 37

§

DEVCONF_ACCEPT_RA_MIN_HOP_LIMIT = 38

§

DEVCONF_IGNORE_ROUTES_WITH_LINKDOWN = 39

§

DEVCONF_DROP_UNICAST_IN_L2_MULTICAST = 40

§

DEVCONF_DROP_UNSOLICITED_NA = 41

§

DEVCONF_KEEP_ADDR_ON_DOWN = 42

§

DEVCONF_RTR_SOLICIT_MAX_INTERVAL = 43

§

DEVCONF_SEG6_ENABLED = 44

§

DEVCONF_SEG6_REQUIRE_HMAC = 45

§

DEVCONF_ENHANCED_DAD = 46

§

DEVCONF_ADDR_GEN_MODE = 47

§

DEVCONF_DISABLE_POLICY = 48

§

DEVCONF_ACCEPT_RA_RT_INFO_MIN_PLEN = 49

§

DEVCONF_NDISC_TCLASS = 50

§

DEVCONF_RPL_SEG_ENABLED = 51

§

DEVCONF_RA_DEFRTR_METRIC = 52

§

DEVCONF_IOAM6_ENABLED = 53

§

DEVCONF_IOAM6_ID = 54

§

DEVCONF_IOAM6_ID_WIDE = 55

§

DEVCONF_NDISC_EVICT_NOCARRIER = 56

§

DEVCONF_ACCEPT_UNTRACKED_NA = 57

§

DEVCONF_MAX = 58

Trait Implementations§

source§

impl Clone for _bindgen_ty_3

source§

fn clone(&self) -> _bindgen_ty_3

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for _bindgen_ty_3

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Hash for _bindgen_ty_3

source§

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl PartialEq for _bindgen_ty_3

source§

fn eq(&self, other: &_bindgen_ty_3) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl Copy for _bindgen_ty_3

source§

impl Eq for _bindgen_ty_3

source§

impl StructuralPartialEq for _bindgen_ty_3

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

source§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.